Friday, February 1, 2013

100 days of school projects

 Every year since 2009 we have had the 'fun' of coming up with another 100 day project for whoever's in kindergarten or first grade. Here are the ones we've done so far:

My son's -  He chose the medium and we thought of things together that he liked or fit the season to make it creative.

50 "stars" + 3 strings for each of 13 "stripes" (that's 39) + 11 strings to spell out "100 strings" =100 strings
(the "i" got 2 - one for the stick, 1 for the dot)

Foam "beads" strung on red pipe cleaners and shaped/twisted into a heart shape.
(he liked flags a lot when he was 5-6 years old. The other was to use up some foam shapes we needed to purge from the craft pile)

Ms. Independent insisted on doing her own thing and refused to accept any of my creative suggestions. She finally agreed 10 stickers to a page so that it would be easy to count (and good practice counting by 10s)

The next year (drat! no picture was taken) - She wanted to use beads, so we strung them on craft wire. She wanted it flower shaped, so we attempted to bend/curve & twist the wire into a flower shape with each petal having 10 beads...it mostly cooperated, and it turned out cute - I take pictures of EVERYTHING - where is my picture of this?

This year we had TWO projects as my twins are in kindergarten - 

My very independent twin decided she wanted a chain "like we make to count down for the end of school".
I suggested felt (since I had most of what we would need) and it wouldn't get torn on the way to school.



 Felt sheets cut into strips and stapled into a chain of rings - just like you would a  paper chain.
(Other than directing and making sure she knew how to use the staple and overseeing she stuck with 'the plan', she did this pretty independently.)


The other looked through my craft surplus and decided to use these little fuzzies (dollar tree - they only come 80 to a pack, so I did have to buy more)

Fuzzies strung on string with a large-eye needle - like you would popcorn for a Christmas tree.


We did find that it was difficult to keep them centered on the needle so that they wouldn't come right off the string - some got a second stitch through it once it was pulled to in place.
I did have to supervise this one a little more:
First of all, there's a needle involved. Secondly, she would push them down the string so hard they all squished together so you couldn't tell one fuzzy from the next. Also, she's the twin that always "needs" help.
Both of these are in sets of 5 (another good counting skill)

Wednesday, February 15, 2012

Happy Valentine's 2012: Stromboli and Jello Hearts

The stromboli idea I found online - the recipe and instructions I made based on the general idea. 
The jello hearts is a family fun idea (link below).
The Stromboli was a big hit - 
the jello heart idea...well, that one will probably be replaced by heart shaped brownies next year!

On to the how....

Stromboli - makes 8
6-7 cups flour
3 T sugar
1 tsp salt
1 T yeast (3 tsp)
3 T oil
2 cups warm water
12-15 oz spaghetti sauce  (half of 26 oz can)
16 oz mozzarella (or other cheese), shredded
1 egg
Parsley, optional (just because it’s my favorite seasoning)

Mix 6 cups flour, sugar, salt, and yeast in stand mixer with dough hook. Start mixing on low speed (2). Add oil and warm water. Once it comes together, add as much flour as needed to make dough not sticky when touched (stop the kneading/mixing to test – poke and see if dough sticks to your finger). Knead for 7 minutes. Remove from hook (with floured hands), form into a smooth ball and put back into (now, greased) bowl. Grease (spray oil) top or cover.  Rise for an hour.

Divide into 4 pieces. For each piece….
Roll into large rectangle (about 10x20 – as large as my cutting board) on floured surface. Slice (with a pizza cutter) long ways (get two long rectangles about 5x20). Top lightly with sauce, cheese, and toppings. 

Roll each long rectangle from long side to create a long rope. Pinch ends and edge. Move (carefully) to baking sheet (greased is a good idea but not required), and shape as desired (hearts for valentines, etc).

Brush tops with egg, sprinkle with parsley. (I added some mozzarella to the seams that had no filling).  Bake 400°F for 15 minutes.




The Eat your heart out jello idea: (it was ok, but the creamy layer - I think if I ever do this again, I would not use unflavored gelatin - it tasted a sweet bland...if that makes sense.)



And lastly, the valentine's card idea I used for my kids with our district and their 'no candy' policy...
come on - I already can't bring my awesomely tasty creations to class parties - now I can't even give 'em M&Ms...what's wrong with this world? (like that cupcake with pink icing still on my kid's pants was really any more nutritional)

2 of my kids used "You color my world" with a piece of chalk tied to the card (two holes punched to tie string through)
2 of my kids used "You make my heart glow" with a glow stick through two punched holes.

(only the preschoolers used these cute hearts - the 1st and 3rd grader used boring little rectangles of white cardstock that they had to decorate themselves because they had 15+ valentines, not just 4)
Should have taken a picture of those too - my 7 year old colored hers with watercolors (yes, the cheap kids kind) and they turned out really cute.)

Glow sticks were a little hard to get to school without cracking and using up the limited glowing time, but I heard that the 3rd graders had a lot of fun with them. (WIN!)

Wednesday, July 13, 2011

Toy Artillery Belt and Holsters

Note: 1/16/13  - this blog post will be updated soon with a real tutorial...my goal is before the end of February 2013.

Our summer activities include a project for each kid of his/her choosing. My one son chose a belt (that went around and over the shoulder) that would hold as many of his play weapons as possible.

The general instructions are below (although you might have to click on the file to make it full sized and readable - or you can get the pdf.) This is not intended as a tutorial, although I could make it one later if someone needed it - and asked.  Several weapons/objects  (like the light saber and walkie talkie) had hooks that could rest on the belt. Several others needed holsters - specifically the little cheap dart gun and the Nerf Maverick dart gun - Little bullet holders for the nerf darts were, therefore, needed too. Those two holsters and bullet holders are what I have patterns for below. (There is an inch square on each pattern piece to help get the sizing right.) The nerf gun holster can be pieced together using the guidelines (pieces are marked for top, bottom, right and left).









 I doubt anyone uses my blog. Hence, the reason I didn't bother with a real tutorial - just a quick pattern and general instructions - so don't judge me by my poor, quickly written instructions! Good luck.

update 2/5/2013
Added help:
For making buttonholes on the holster to attach it to a belt.

Put it on a Belt -  create 'button holes' big enough to accommodate a belt
- a later time making this, I made a casing for a belt by folding over fabric at the top.

1. Hold the holster up to the belt where you want it to sit and mark vertically where you want the buttonholes to be. Also mark little horizontal slashes for where the belt edges are (so you know how tall to make the buttonholes).

 NOTE - You could do this with a buttonhole function on the sewing machine - espcially if you have the 4 step kind, but my current machine has  a 1 - step button hole so I insert a button into the buttonhole foot, align it (that's the tricky part), drop the foot, and hold down the pedal...occasionally 'convincing' the thick layers of fabric to keep moving.  I can't use a 1-step for this project because the foot will not accomodate a button as large as 1" or more.

2. Set your machine's zig zag stitch to a narrow setting (test it out on a scrap of fabric to see what you like) and to a very short length (so that the zigs touch the zags nearly in straight lines sideways...sometimes called a satin stitch.

If you have a 4-step button hole function, just set your machine to that - and start on that edge. Change which step as you go around your line.

3. Start at one end of the line you've drawn (you'll need to extend the hole a little longer than the line so the belt goes through comfortably) - Zigzag down the  side of the line - keeping it straight.

4. Turn the fabric and repeat on the other side of the line - leaving only the drawn line exposed.

5. Now set your zig zag to it's shortest possible length (or drop the feed dogs - those are the little jagged metal things that move up and down in a circular motion under where you feed the fabric - you don't want the fabric to move, so you flip a switch to turn them off). And set the zig zag wide enough to go across the 2 parallel rows of zig zag stitches plus the tiny gap in between. (If yours doesn't go this wide, then just as wide as it will go.)

6. Now, with the zig zags/line running in the direction from you towards machine, align the end of the line under the needle. Sew back and forth a bunch (fabric shouldn't move - a bunch of sideways stitches will 'cap' the end of your buttonhole to keep it from continuing to tear once we actually make the hole.  Do this same thing at the opposite end of the line.

7. Your line should now be completely surrounded by stitches.  Place a straight pin at each end of your button hole, slightly closer together than the end stitches.  CAREFULLY, with your seam ripper, insert the pointed end through the fabric in between the two pins, and slowly rip open a buttonhole. (The pins should stop you from ripping right through the opposite end of the button hole.) You can also start with a seam ripper to make a small hole and then cut with scissors. Whatever works for you.

Done (make 2 buttonholes so that the belt can go in one and out the other...and the farther you space them the less the holster will flop around).

Tuesday, March 1, 2011

Cinnamon Rolls

IMG_4393

 

First the recipe for easy copy/paste and printing…

My Mom’s Cinnamon Rolls – 60 minute recipe (approximately)

Rolls:

2 pkts yeast

1 ½ cup warm milk

¼ cup sugar

1 tsp salt

¼ cup butter, melted

4 ½ cup plain flour

2T Butter

Brown Sugar

Cinnamon

Icing:

2-3 c Powdered sugar

2-3 T Milk

Vanilla (I leave this out – probably just a few drops if you like it)

Mix yeast, milk, and sugar and let sit 5 minutes. Add salt, butter, and flour. Mix (*don’t knead) and set for 25 minutes. Roll out and rub with melted butter. Sprinkle brown sugar and cinnamon. Roll up and slice about ½” thick. Place on lightly greased cookie sheet. Bake 375° for 10 minutes.

Mix icing ingredients to desired consistency and drizzle over baked rolls.

IMG_4392

So, the recipe with pictures now.

Heat 1 1/2 cups milk in microwave for about 2 minutes (I’ve used 2%, skim, and powdered…all work, 2% was used here). Test with your finger. It should be warm/hot, but not burn you. If it’s too hot, let it cool so you don’t kill the yeast. Add 1/4 cup sugar and 4 1/2 tsp (or 2 pkts) yeast. Stir and let sit 5 minutes.

I forgot to take a picture here…It just looks all frothy and light brownish on top and liquidy underneath. (If it doesn’t you probably have dead yeast…or you killed it with hot milk.) I’ll add a picture here later.

After 5 minutes, add in everything else (1 tsp salt, 1/4 cup butter, and 4 1/2 cups flour) and mix. (really, no kneading – I do stir pretty tough to help the flour all stir in well.) cover (I toss a paper towel over the top) and let rise 25 minutes.

The dough right after mixing:

IMG_1373

After Rising (25 minutes):

IMG_1375

After 25 minutes, I roll it out to about …24” by the width of (normal) aluminum foil.

Melt 2T butter in microwave, pour on dough (see my ‘line of butter’), spread around (I use my hands for all this – you can use a spoon if you like). Drop on all the brown sugar you like, and spread evenly. Sprinkle on the cinnamon. (I don’t measure these last two – I just put on what I think looks good.)

IMG_1380IMG_1382IMG_1384

Now, you’re ready to roll. You can use the foil to help get the rolling started, but use your hands to finish or it will be too loosely rolled.

IMG_1390

Now – on to the shape…

My mom uses a knife to cut hers in 1/2” slices. My sister in law cuts hers into about 12 rolls and just cuts from one end to the other (like my mom). I am a little methodical about how I do things - and the first question my kids ask is “How many do I get?” So I’m going for quantity and I have to cut it in a logical method.

So, first in half…then into fourths…then into 8ths – this is all halving over and over again)

IMG_1391IMG_1392IMG_1393

Then each 8th into 3 rolls (24 total) – notice they aren’t perfectly identical in size – and that doesn’t bother me – and they are ‘falling over’…it’s ok.

However,sometimes the ‘squished roll’ does bother me…so when it does, I uncoil and recoil. Other times, I just have oval shaped rolls.  Ideally, you could use dental floss (not the mint flavor – plain) and they wouldn’t squish, but I just use a knife or pizza cutter.

IMG_1394IMG_1395IMG_1396

Before and after baking: (once you have them on the pan, you can cover and put them in the fridge over night to bake the next morning…so you get just the rolls and not the work for breakfast)

IMG_1397IMG_1398

I bake them at 375 for about 10 minutes. (This was perfect for my last oven…this one usually takes longer than 10 minutes.)

While the rolls are cooling, make the icing.  For the icing, mix 2-3 cups powdered sugar and 1T of milk at a time (about 2-4 T total) to get to the consistency you like. I get it to about this consistency. My mom’s recipe says drizzle…I should probably change that to “drown” for my cookbook!

IMG_1400

YUM

IMG_1401

Monday, October 11, 2010

Child’s Apron

My girls all have aprons (at least the three that can walk), but my son had none and wanted one for art class at school. I’d been meaning to make him one for a while (like a couple years or so)…yes, my project back log is several years. :)
So, when he asked himself, I bumped up his project to the top of the list (not like it took me that long anyways) -
 
I didn’t photograph this thing step by step (b/c I just wanted to get it done and move on to the next thing on my list – I’m having a self-inflicted project overload week).
but…I am posting my cutting layout and instructions. If you want to make it and can’t figure it out…well, too bad. (just kidding, i can post photo instructions if anyone ever checks this blog and asks for them)
Where my measurements came from, in case you want to make your own tailored to your kid:
I measured across his chest (9”) and down as long as I wanted this to go (25” to the knees). Then, across his knees to the width I wanted at the bottom (18”). Lastly, I measured around his neck to the two edges of the apron top (16” – this is for the elastic measurement); and around his waist-ish to where I wanted the waist strap to go (17-18”)…and added about 8-10 inches for lots of growing (and apron sharing) room – got about 25-28”. Everything got an extra inch since I do 1/2” seam allowances…except the neck strap – b/c I wanted 1/4” seams.
The length of the neck strap was determined by taking my piece of elastic (cut to the measurement I wanted the strap to be) and stretching it as far as it could go. This stretched measurement is the 30” I cut the strip of fabric to be.


I folded the fabric in half (selvage to selvage) and in half again (same direction), then cut a 26” length of fabric.
Starting at one end, I measured (from the fold) 5” and make a mark. At the other cut end, I measured 9 1/2” from the fold. Then, I connected these marks and cut along them. when unfolded, I had two trapezoid shaped pieces. the rest of the fabric was for the neck strap (2” wide piece) and waist strap (4” wide piece).
I made the neck strap by folding in half lengthwise and sewing a 1/4” seam. After flipping it (I use the safety pin method), I inserted the length of elastic, sewing across the ends to hold the end of the elastic at each end of the strap.

The waist strap I made in the same way, except, I sewed on some soft velcro to the outside. (In hind sight, I’d have sewn it after flipping the piece right side out, but I sewed the velcro on first, then made the strap, so I have a seam running on the side opposite the velcro –yeah, the side of the strap everyone sees)…not worth seam ripping.

The pocket was made (this is probably obvious), by sewing two scraps right side together on three sides, flipping, and then sewing the open side shut.
The pocket and both straps were sewn to the front of the apron (which I also embroidered at the top). The two apron pieces were sewn right sides together, leaving a hole for turning on one side….flipped, (should have pressed, but didn’t want to heat up the iron), and top stitched around all edges, closing my “hole” first.
DONE.

Now, you may ask,
WHY DID SHE SHARE THIS PROJECT WITHOUT PHOTOS…WHAT KIND OF A TUTORIAL IS THIS?
Well, I shared it b/c for a while I couldn’t think of a way to make an apron that my kids could put on themselves – I have to tie it in the back at the very least, if not adjust the neck strap too – or let the neck hang low (like mine does…hate that) -
So my solutions:
Put some elastic into the neck strap so that it stretches to fit over the head, but then is short enough when unstretched so that the apron is actually high enough to protect his shirt.
seth apron - neck strap
Make the tie not a tie closure – most of my kids can pull a strap around to the front and everyone can do velcro! – put the closure in the front…


Now, I want to make the girls aprons too…oh, wait…let’s finish the other projects that are more pressing  - like halloween. :)

Tuesday, January 20, 2009

Crown Pattern


Our original crowns (for my older two) look like this:
I made these crowns because I was tired of my daughter's plastic crowns breaking and my son wanted a king crown (like you can find those!), so I made them these, using the instructions as a guide. (I used fusible fleece to make them...which my fabric store no longer carries!)




Now, my twins want crowns! These instructions focus mostly on how I made my pattern, since the pattern, I think is the trickiest part to make in this project. (I did list basic instructions on how to put it together, but they're very similar to the original instructions I used the first time I made crown.)
This time, I didn't want to deal with making the triangles lie flat at the peaks and valleys...but I decided the square (castle tower top) design would be too many turns, so I am attempting a Princess Aurora style (up to a central peak, then back down).
Sketch out what you want.
IMG_0266
Measure the head. (18.5" or 19"?- round to 20" for growing room) This is your bottom line measurement. I chose 2 1/2 inches for the height (at the back sides). And I chose 4" for the middle peak height.
I taped together two 12x12 pieces of white cardstock (scrapbook pile).
Draw bottom line (20", will be 21" after seams added...plus extensions later)IMG_0270
Drawing 4" high line, centered on bottom line
IMG_0271
Use a string to shape curve from center peak to one side.
IMG_0278
When you're happy with the look, draw along string (very carefully!)
IMG_0279 IMG_0280
Add 1/2" along entire bottom line. Add 1/2 inch along the half-curve drawn and side for seams.
*if you have enough paper, you can extend the side of crown an inch or two for overlap in the back
*if not, just tape more paper to the end later
Cut along the bottom, side, and curve. Make crease on center (peak of crown) line. (A mechanical pencil with the lead retracted works well; use a ruler to trace along line.)
Fold this half of crown pattern towards other (undrawn) half.
IMG_0282
Trace pattern. Cut out.
If your paper wasn't wide enough (like mine), cut 2 rectangles - the height of the crown at back (for me 2.5+0.5+0.5=3.5 inches high) and 2" wide. Tape to each end (overlapping paper 1/2").
Now, you have your pattern.

Pictures from here may not be necessary, but I might add some later.
Directions for Construction (pretty much the same as the original):
Cut out two pattern pieces from fabric and 1 from interfacing, fusible fleece, or other stiffening material.
Layer: fabric (right side up), fabric (right side down), interfacing.
Starting an inch away from one edge at bottom of crown, sew toward closer edge, up side, across top, down other side, and an inch along bottom (leaving rest of bottom open).
clip corners and turn right side out. Press.
Turn bottom edges in, and topstitch along bottom edge.
Fit around child's head (if possible),overlapping ends at back. Mark where overlap should meet. Either sew back pieces together, or sew on velcro strips to make adjustable.
Decorate however you like. (We'll probably use fake jewels again.)

Another cute idea:
A dowel with ribbons glued to one end, and then covered in fabric makes a cute 'magic wand' for a fairy princess.
A dowel stuck through a styrofoam ball, and then the whole thing covered in matching fabric (to crown) makes a nice sceptor for a king or queen.